Plastic Regrinds
Sorted, washed and granulated polyethylene scrap supplied at a consistent particle size. Regrind is an economical way to hold cost down in pipe, conduit and moulded parts without giving up processability — each lot is graded by source so you know exactly what is going into the hopper.
PE100 Pipe Regrinds
Pressure-pipe offcuts and rejects sorted strictly by grade, washed and granulated to a uniform particle size. Retains the PE100 base properties, making it an economical feed for pipe, conduit and moulded parts.
Applications
- Pipe re-extrusion
- Conduit & duct pipe
- Injection moulding
- Compounding feedstock
| Property | Typical Value | Notes |
|---|---|---|
| Source | PE100 pipe offcuts & rejects | Sorted by grade |
| Particle Size | 6 – 10 mm | Screened, dust removed |
| Density | 0.950 – 0.960 g/cm³ | Typical — request datasheet |
| Bulk Density | 0.45 – 0.55 g/cm³ | Loose, as packed |
| Moisture | < 0.2 % | Washed and dried |
| Colour | Blue / Black | Sorted by shade on request |
| Packaging | 25 kg bags / jumbo bags | Bulk packing on request |
PE80 Pipe Regrinds
Regrind produced from PE80 irrigation and water supply pipe, sorted by grade before granulation. A cost-effective blend component for irrigation pipe, conduit and general extrusion where PE80 properties are the target.
Applications
- Irrigation pipe re-extrusion
- Conduit & duct pipe
- General extrusion
- Compounding feedstock
| Property | Typical Value | Notes |
|---|---|---|
| Source | PE80 pipe offcuts & rejects | Sorted by grade |
| Particle Size | 6 – 10 mm | Screened, dust removed |
| Density | 0.948 – 0.958 g/cm³ | Typical — request datasheet |
| Bulk Density | 0.45 – 0.55 g/cm³ | Loose, as packed |
| Moisture | < 0.2 % | Washed and dried |
| Colour | Blue / Black | Sorted by shade on request |
| Packaging | 25 kg bags / jumbo bags | Bulk packing on request |
PE63 Pipe Regrinds
Granulated PE63 low-pressure pipe scrap, screened to a consistent particle size. Well suited to conduit, duct pipe and general extrusion where processability matters more than peak pressure rating.
Applications
- Conduit & duct pipe
- Low-pressure pipe
- General extrusion
- Compounding feedstock
| Property | Typical Value | Notes |
|---|---|---|
| Source | PE63 pipe offcuts & rejects | Sorted by grade |
| Particle Size | 6 – 10 mm | Screened, dust removed |
| Density | 0.945 – 0.955 g/cm³ | Typical — request datasheet |
| Bulk Density | 0.45 – 0.55 g/cm³ | Loose, as packed |
| Moisture | < 0.2 % | Washed and dried |
| Colour | Blue / Black / Assorted | Sorted by shade on request |
| Packaging | 25 kg bags / jumbo bags | Bulk packing on request |
HDPE 200 Ltr. Drum Regrinds
Regrind produced from 200 litre HDPE drums, cut and granulated after labels and residue are removed. High molecular weight and impact strength make it a strong feed for blow-moulded containers, crates and moulded industrial parts.
Applications
- Blow-moulded containers
- Crates & pallets
- Injection moulding
- Compounding feedstock
| Property | Typical Value | Notes |
|---|---|---|
| Source | 200 litre HDPE drums | Labels & residue removed |
| Particle Size | 8 – 12 mm | Screened, dust removed |
| MFI (190 °C / 2.16 kg) | 0.2 – 0.6 g/10 min | Typical — request datasheet |
| Density | 0.950 – 0.958 g/cm³ | Typical — request datasheet |
| Moisture | < 0.2 % | Washed and dried |
| Colour | Blue / Assorted | Colour-sorted lots on request |
| Packaging | 25 kg bags / jumbo bags | Bulk packing on request |
HDPE Blow Regrinds
Granulated scrap from HDPE blow-moulded containers and bottles, washed to remove residue and screened to a uniform size. A consistent, economical feed for moulding and compounding lines.
Applications
- Blow moulding
- Injection moulding
- Pipe & profile extrusion
- Compounding feedstock
| Property | Typical Value | Notes |
|---|---|---|
| Source | HDPE blow-moulded containers | Washed and de-labelled |
| Particle Size | 8 – 12 mm | Screened, dust removed |
| MFI (190 °C / 2.16 kg) | 0.3 – 0.9 g/10 min | Typical — request datasheet |
| Density | 0.948 – 0.958 g/cm³ | Typical — request datasheet |
| Moisture | < 0.2 % | Washed and dried |
| Colour | Natural / Assorted | Colour-sorted lots on request |
| Packaging | 25 kg bags / jumbo bags | Bulk packing on request |
Conduit Pipe Regrinds
Regrind from HDPE electrical conduit and cable duct pipe, granulated to a uniform particle size. An economical feed for conduit re-extrusion, moulded fittings and general-purpose extrusion.
Applications
- Cable duct & conduit pipe
- General extrusion
- Injection moulding
- Compounding feedstock
| Property | Typical Value | Notes |
|---|---|---|
| Source | HDPE conduit & duct pipe | Sorted before granulation |
| Particle Size | 6 – 10 mm | Screened, dust removed |
| Density | 0.945 – 0.955 g/cm³ | Typical — request datasheet |
| Bulk Density | 0.42 – 0.52 g/cm³ | Loose, as packed |
| Moisture | < 0.2 % | Washed and dried |
| Colour | Black / Assorted | Colour-sorted lots on request |
| Packaging | 25 kg bags / jumbo bags | Bulk packing on request |
Need Help Choosing the Right Grade?
Tell us about your line, pressure class and monthly volume — we'll recommend the grade that runs best.
Request a Quote